Question:
How do I load my kiln?
Kiln furniture placement
All furniture and ware in the kiln should be placed at least 1” from any element. This ensures even heat flow, and minimises the risk of contamination of the elements by oxides.
Don't over-pack
When loading your kiln, do not pack it too full. It is a bad habit to stack things inside of each other, on top or in any combination to save space. Too much of this and the stress caused may result in cracked bisque.
Pre-firing
Did you know that ‘pre-firing' is a test firing of a kiln to check the function of a kiln when new?
Placing cones
Don't forget to add your witness cones while loading. You will want to do this even if you have a kiln sitter or electronic controller, to see what Cone was actually achieved inside the kiln. If you plan to use the cones to determine when to turn off the kiln, make sure they are visible through the peephole.
Moving pieces
Be careful placing and moving your pieces around. Instead of grabbing them at their tops, lift them from their bottoms.
economical use of posts
For the most economical use of posts and kiln capacity, place ware approximately the same height in each layer
Ceramics Frequently Asked Questions
What precautions should I take in the studio?
How do I fire an electric kiln?
What are some stoneware glazes?
What Precautions when using dry ingredients?
How do I apply opaque stains ?
What should I keep in mind when designing my studio?
What tools do I need to start potting?
How do I best promote myself and my work?
What safety aspect should I keep in mind when working with glazes?
What should I remember when firing the kiln?
How do I best publicise my business?
How do I make a simple plaster mold?
How do I fire overglazes/lustres?
How do I create fine feature lines?
How and when sholuld I apply underglazes?
Are they Water or oil base stains?
Are any two kilns are exactly alike?
Can I use sand to stop glaze running onto shelves
Does greenware need to be dry before loading?
What is the history of the Potter´s Wheel?
What is The History of the Way of Tea
What is Celadon (Cheong-Ja) - the Stuff of Kings?
What is an overglaze marbleizer?
Is there a trick toThrowing Porcelain?
What are some stoneware glazes?
What are some good tools for decoration?
How do I apply texture to my piece?
Do I need kiln wash for bisque?
How do I refire a glazed piece ?
What must I remember when Raku firing?
How do I add decoration to my ceramics?
How do I care for my elements?
Does over firing produce poor colour in coloured glaze?s
What are some Black Firing Tips and Tricks?
What is the safest way to pack my ceramics?
How do I do a reduction firing?
automatic kiln sitter, should I trust it?
What are some tips for draining a mold?
What safety measures should I take with Raku Firing?
How do I attach a bat to the wheelhead?
What tools do I need for ceramics
What are suggested plate clay weights?
What do I need to get started?
What tools do I need to make a coil pot
How do I fire ceramic bisque ?
How do I recycle batches of clay quickly
What is the correct firing time?
How to I prepare and make slabs?
What materials are toxic in Ceramics?
Can Crackle glazes be used for food?
How do I avoid S cracks in wheel thrown ware
How do I get the press onside?
What are the Approx. firing times?
Ho do I avoid pitting and pinholes?
How do I decorate my ceramics?
How do I Bisque fire in an electric kiln?
How do I decorate my ceramics?
How do I apply crackle glazes ?
What effects can I achieve with a brush?
How do I Drain small pour holes?
How do I care for my new Kiln?
can I draw directly onto a piece?
How do I fire different bodies?
What is the humming in my new kiln?
What should I remember when firing a new kiln?
how do I get the best results in glazing?
How do I prevent dirt on my greenware?
How do I accomodate Clay Storage in my studio?
How do I prevent sagging during firing?
How do I load my brush for applying underglaze?
Why should I use pottery plaster?
How do I prevent glazes from settling ?
How do I create a woodtone effect?
What are some Doing well Quotes?
How do I care for my elements?
How do I store my throwing tools?
What is the history of Ceramics?
Why do I get black spots in my glaze?
How do I load my kiln for a glaze firing?
| Guru Spotlight |
| Jolyn Wells-Moran |
