Question:
How do I apply one-strokes?
brushing one-strokes
If you plan on using only a small amount of a one-stroke colour, it is possible to obtain the proper painting consistency by loading a wet brush with colour.
Colour ceramic slip
One-strokes can be used to colour ceramic slip. It takes quite a bit but you can do it. You may also add it to slip and swirl it in, casting a piece immediately. When fired, the piece will have a marbled effect.
decorate over a sponged-on froth glaze.
One-strokes can be used to decorate over a sponged-on froth glaze.
Applying one-strokes
When using one-strokes you may find that colours look too light after your piece has been fired. This is caused by not applying enough coulour. If you apply too much however, there is a possibility of it popping off.
Do not apply one-stroke by flowing it on like glaze. Simply load your brush properly and apply it in smooth, even strokes.
All brush streaks will show when applying one-stroke. Even, smooth coverage is important.
Uses for one-strokes
Since one-strokes are concentrated colour pigments, they are most commonly used to write messages or sign pieces that will later be glazed.
brushing one-strokes
If you see some of your strokes streaking when applying one-stroke, go back over them with additional colour and smooth them out.
By using a combination of water and one-stroke on your brush, you can paint shaded areas in one-stroke, from light to dark.
Adding to underglaze
You can change the colour of an opaque underglaze by adding one-stroke to it. You should test fire your new colour before using.
Antiquing with one-strokes
You can make an antiquing wash using one-stroke by mixing colour pigment to about 3 to 4 parts water. The less water, the darker the wash
Using one-stroke for antique effects is best accomplished on bisque.
Ceramics Frequently Asked Questions
What precautions should I take in the studio?
How do I fire an electric kiln?
What are some stoneware glazes?
What Precautions when using dry ingredients?
How do I apply opaque stains ?
What should I keep in mind when designing my studio?
What tools do I need to start potting?
How do I best promote myself and my work?
What safety aspect should I keep in mind when working with glazes?
What should I remember when firing the kiln?
How do I best publicise my business?
How do I make a simple plaster mold?
How do I fire overglazes/lustres?
How do I create fine feature lines?
How and when sholuld I apply underglazes?
Are they Water or oil base stains?
Are any two kilns are exactly alike?
Can I use sand to stop glaze running onto shelves
Does greenware need to be dry before loading?
What is the history of the Potter´s Wheel?
What is The History of the Way of Tea
What is Celadon (Cheong-Ja) - the Stuff of Kings?
What is an overglaze marbleizer?
Is there a trick toThrowing Porcelain?
What are some stoneware glazes?
What are some good tools for decoration?
How do I apply texture to my piece?
Do I need kiln wash for bisque?
How do I refire a glazed piece ?
What must I remember when Raku firing?
How do I add decoration to my ceramics?
How do I care for my elements?
Does over firing produce poor colour in coloured glaze?s
What are some Black Firing Tips and Tricks?
What is the safest way to pack my ceramics?
How do I do a reduction firing?
automatic kiln sitter, should I trust it?
What are some tips for draining a mold?
What safety measures should I take with Raku Firing?
How do I attach a bat to the wheelhead?
What tools do I need for ceramics
What are suggested plate clay weights?
What do I need to get started?
What tools do I need to make a coil pot
How do I fire ceramic bisque ?
How do I recycle batches of clay quickly
What is the correct firing time?
How to I prepare and make slabs?
What materials are toxic in Ceramics?
Can Crackle glazes be used for food?
How do I avoid S cracks in wheel thrown ware
How do I get the press onside?
What are the Approx. firing times?
Ho do I avoid pitting and pinholes?
How do I decorate my ceramics?
How do I Bisque fire in an electric kiln?
How do I decorate my ceramics?
How do I apply crackle glazes ?
What effects can I achieve with a brush?
How do I Drain small pour holes?
How do I care for my new Kiln?
can I draw directly onto a piece?
How do I fire different bodies?
What is the humming in my new kiln?
What should I remember when firing a new kiln?
how do I get the best results in glazing?
How do I prevent dirt on my greenware?
How do I accomodate Clay Storage in my studio?
How do I prevent sagging during firing?
How do I load my brush for applying underglaze?
Why should I use pottery plaster?
How do I prevent glazes from settling ?
How do I create a woodtone effect?
What are some Doing well Quotes?
How do I care for my elements?
How do I store my throwing tools?
What is the history of Ceramics?
Why do I get black spots in my glaze?
How do I load my kiln for a glaze firing?
| Guru Spotlight |
| Patricia Walters-Fischer |
