Drying

Read this tip to make your life smarter, better, faster and wiser. LifeTips is the place to go when you need to know about Molds/Casting and other Ceramics topics.

How do I care for my molds?

Drying

It is important not to dry your molds too fast. Store them on slated shelves so that the natural air can circulate around them.
When buying a new mold be sure you always open it immediately to inspect the inside for any damage.
When cleaning the inside of a mold, never use anything other than a brush. If you encounter a stubborn piece of clay simply roll some waste clay into a ball and pounce it off.
Since molds work on the principle of absorption, it is important that you avoid touching the inside with your fingers. You do not want to leave any oil residue that may clog pores.
Be sure that you remove all dried clay from the seam area of a mold. It can dry and when you put the mold back together and start pouring again, the dried clay may warp the mold and eventually cause rust spots on your molds.
You may notice a fuzz on your molds when they are being sorted. This fuzz is caused by deflocculents in the slip that have penetrated the mold. You should remove this fuzz as it will harden and plug the pores of the mold.

   

Comments

4/13/2007 3:50:10 AM
Xabia said:

Hi can you please tell me if the fuzz on my molds is dangerous if inhaled. It can become airbourne so fast and yes I do wipe down my molds but am concerned as to whether it is safe ? Many thanks




Name:


URL: (optional)


Comment:


Not finding the advice and tips you need on this Ceramics Tip Site? Request a Tip Now!


Guru Spotlight
Sherril Steele-Carlin